Danh mục sản phẩm
ĐỒNG HỒ SO ĐIỆN TỬ 543-350B 12,7MM ; 0,001MM
Liên hệ
- Vận chuyển giao hàng toàn quốc
- Phương thức thanh toán linh hoạt
- Gọi ngay 034 841 8000 để mua và đặt hàng nhanh chóng
MÔ TẢ SẢN PHẨM
Đồng hồ so điện tử 543-350B
Thông số kỹ thuật đồng hồ so 543-350B
Range: | 12.7 mm |
Digital step: | 0,001 mm |
Repeatability: | 0,002 mm |
Inch-Metric: | Metric |
Max. Permissible Error (Total Range): | 0,003 mm |
Hysteresis: | 0,002 mm |
Type: | EN ISO Standard |
Mass: | 285 g |
Data output: | Yes |
Measuring force: | ≤2,5 N N |
Scale: | Capacitance type, ABSOLUTE linear encoder |
Max. response speed: | Unlimited |
Stem Ø: | 8 mm |
Contact point: | Carbide ball, thread M 2.5 x 0.45 mm |
Alarm: | Counting value composition error, overflow error, tolerance limit setting error |
Power supply: | 5 – 24 V DC / 100mA (max) |
Display: | LCD, character height 8 mm |
Protection: | IP54 |
Max. response speed: | Unlimited |
Measurement frequency (MAX/MIN/RANGE): | Standard mode: 100 times/s (plunger speed max. 0.1mm/s for peak measurement) |
Delivered: | With signal cable 4 m. One end is fixed to the main unit. no connector is supplied for the other end. |
Counting direction switchable: | Yes |
Signal output: (+NG, OK, -NG): | Yes |
Signal input: No-voltage input, (PRESET_RECALL/ZERO, HOLD_RESET): | Yes |
ZERO/ABS: | Yes |
GO/±NG judgement: | Yes |
ON/OFF: | Yes |
GO/±NG judgement via LED: | Yes |
GO/±NG judgement on LCD: | Yes |
MAX/MIN/RANGE: | Yes |
PRESET 3x: | Yes |
Analog bar resolution switchable: | Yes |
Function lock: | Yes |
Calculation function (with formula): | Yes |
Digital/Analog: | Digital |
This is an externally-powered Digimatic Indicator with a N-ch open drain –NG, OK, +NG output.
- Dust-protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54)
- Measures MAX/MIN/RANGE (run-out value).
- Saves three different Preset and Tolerance settings.
- Fast measurement frequency mode (detection cycle 50 times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE)
- Calculation function Ax. Coefficient A freely definable, x = displacement of the plunger
- Analogue bar graph in the display (12 different scales switchable)
- GO/±NG tolerance judgment function
Catalogue: 543-350B
Đánh giá
Chưa có đánh giá nào.