Danh mục sản phẩm
ĐỒNG HỒ SO ĐIỆN TỬ 543-300 12,7MM ; 0,001MM
Liên hệ
- Vận chuyển giao hàng toàn quốc
- Phương thức thanh toán linh hoạt
- Gọi ngay 034 841 8000 để mua và đặt hàng nhanh chóng
MÔ TẢ SẢN PHẨM
Đồng hồ so điện tử 543-300
Thông số kỹ thuật đồng hồ so 543-300
Range: | 12.7 mm |
Digital step: | 0,001 mm |
Repeatability: | 0,002 mm |
Inch-Metric: | Metric |
Max. Permissible Error (Total Range): | 0,003 mm |
Hysteresis: | 0,002 mm |
H MPE (Hysteresis): | 0,002 mm |
Type: | EN ISO Standard |
Mass: | 170 g |
Data output: | Yes |
Measuring force: | ≤ 1,5 N |
Scale: | Capacitance type, ABSOLUTE linear encoder |
Max. response speed: | Unlimited |
Stem Ø: | 8 mm |
Contact point: | Carbide ball, thread M 2.5 x 0.45 mm |
Alarm: | Low voltage, ABS composition error, overflow error, tolerance limit setting error |
Power supply: | 1 battery CR-2032 |
Battery life: | Standard mode: approx. 1 year fast mode: approx. 4.5 month |
Display: | LCD, character height: 8 mm, rotatable 330° |
Protection: | IP42 |
Max. response speed: | Unlimited |
Measurement frequency (MAX/MIN/RANGE): | Standard mode: 10 times/s fast mode: 50 times/s (plunger speed max. 50 µm/s for peak measurement) |
Delivered: | Including 1 battery |
Low voltage alarm: | Yes |
Counting direction switchable: | Yes |
ZERO/ABS: | Yes |
GO/±NG judgement: | Yes |
Digimatic data output: | Yes |
ON/OFF: | Yes |
Lock function: | Yes |
Fast measurement mode: | yes |
MAX/MIN/RANGE: | Yes |
PRESET 3x: | Yes |
Analog bar resolution switchable: | Yes |
Function lock: | Yes |
Calculation function (with formula): | Yes |
Power supply report: | UN 38.3 Test Summary Report |
Digital/Analog: | Digital |
This indicator is the MAX/MIN/RANGE value holding function model .It offers the following benefits:
- The MAX/MIN/RANGE (run-out value) can be measured
- A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably
- Easy indicator setup via a setup menu
- Analogue bar graph in the display (12 different scales switchable)
- GO/±NG tolerance judgement function
- This indicator enables the use of a calculation function for the measured value Ax
- Coefficient A is freely definable and x = displacement of the plunger
- A USB interface box can be used to set up the indicator from PC via dedicated software
Catalogue: 543-300
Đánh giá
Chưa có đánh giá nào.